Description
The Bolt Threading Machine is use to cut the external threads with the help of Tangential chaser. Chaser is use as a cutter in Bolt threading machine. Bolt remain still, Die-head rotates and different type of threads can be cut parallel and taper such as BSPT, BSW, BSP, NPT, UNF, METRIC, UNC, ACME, BSF Threads. The machine mainly consists the following:-
- Base
- Head Stock
- Saddle
- Bed or Pillar Type Clamping Vice
- Die-Head
BOLT THREADING MACHINESÂ are designed to give maximum efficiency and reliable performance under the most severe conditions of service with minimum maintenance cost. All the necessary requirements are combined in this model to from the basic fundamentals of correct bolt threading. All the gears are made of case hardened steel with extra large face with and tooth thickness and cut on hobbing machine for noiseless operation even at high speed. Naturally the are built with high standards of workmanship, material and quality so closely associated with COMPANY TRADITION.
Range of Bolt Threading Die Heads.
- 1/4" to 1" Capacity do/-
- 3/8" to 1.1/2" Capacity do/-
- 1/2" to 2.1/2" Capacity do/-
Features:
- The Spindle Bore 40mm Fitted with Taper Bearing 32212 & 32211
- The Machine Has Two Speeds 60 & 90 RPM
- All Gears are Tempered (Oil Seals 42-12-65)
- Motor Pulley 12" Diameter, V-belt Drive Vice Fitted with Jaw
